Ceramic Pro

Exterior Protection

Warranty: 3 years


Installations to date:


We have a loaner vehicle available FREE of charge with the purchase of any of our coating package.

Opti-Coat Pro is not a wax or sealant like other products on the market. It is a ceramic clear coating very similar to factory type clear coats. 1 layer of Opti-Coat measures approx. 2 microns in thickness, or about 100 times thicker than your typical wax or sealant.

Unlike paint protection sealants such as PTFE, Nano Sealants, GlassPlexin or diamond gloss that degrade over time and are easily removed through washing with water or chemicals, Opti-Coat does not degrade and cannot be removed by chemicals such as heavy duty truck wash or even caustic degreasers. It is totally resistant to these chemicals and produces a permanent film that is chemically bonded with the factory paint layers. Opti-Coat is effectively the vehicles new outer clear coat. It is far more resistant to chemical etching than factory clear coats and far more resistant than competing paint protection sealants. The 2 micron layer also provides a thick buffer between any damage and the factory paintwork.

$795.00


WHATS INCLUDED:

  • Exterior Preperation Detail(more specific details in the process)

  • 2 Coats of Opti-Coat Pro on all body panels


The Process

The vehicle is undergoes a Full Exterior Prep Wash which entails:

  • Wheel wells, Tires, Wheel face and dish are cleaned.

  • Door and Trunk jambs are degreased and cleaned.

  • Exhaust tips are cleaned.

  • Bug splatter is removed from the front impact areas(Bumper, Hood Edge, Fender Edges, Mirror Faces, Windshield and edge of the Roof)

  • Tar is removed from typical impact areas(Side Skirts, Bottom Edge of Fenders, Doors and Quarter Panel, Rear Bumper and Trunk lid)

  • A Clay Bar is used to remove overspray and any other containments embedded into the paint (Etched Bug Splatter, Tree Sap, Etched Tar)

  • Vehicle is dried off using compressed air to remove all sitting water in cracks and crevices, then dried using microfiber

The vehicle is assed for any defects that can be removed with paint correction, we typically recommend a paint correction if it is older than a year old. Ideally a vehicle should be in it’s most perfect state possible before purchasing a protection package.

The vehicle is prepped with a high potency isopropyl spray to remove any remaining waxes or fillers and to ensure a clean surface to coat.

The vehicle receives two layers of Opti-Coat Pro coating and all coated surfaces are monitored for an even leveling throughout the whole coating application process.

The coating cure process is accelerating with the use of various Infrared lamps being circulated around the vehicle to ensure the coating is fully cured.

A non-slick water based tire shine is applied and all the exterior windows are cleaned.

Examples